5.3: Applications of Polynomials

In this section we investigate real-world applications of polynomial functions.

Example \(\PageIndex<1>\) The average price of a gallon of gas at the beginning of each month for the period starting in November 2010 and ending in May 2011 are given in the margin. The data is plotted in Figure \(\PageIndex<1>\) and fitted with the following third degree polynomial, where t is the number of months that have passed since October of 2010. \[p(t)=-0.0080556 t^+0.11881 t^-0.30671 t+3.36 \label \] Use the graph and then the polynomial to estimate the price of a gallon of gas in California in February 2011. fig 5.3.1.png\[\begin\hline \text < Month >& > \\ \hline \text < Nov. >& \\ > & \\ > & \\ > & \\ > & \\ > & \\ \hline\end \nonumber \] Solution Locate February (\(t = 4\)) on the horizontal axis. From there, draw a vertical arrow up to the graph, and from that point of intersection, a second horizontal arrow over to the vertical axis (see Figure \(\PageIndex\)). It would appear that the price per gallon in February was approximately \(\$3.51\). fig 5.3.2.pngNext, we’ll use the fitted third degree polynomial to approximate the price per gallon for the month of February, 2011. Start with the function defined by Equation \ref and substitute \(4\) for \(t\). \[\begin p(t) &=-0.0080556 t^+0.11881 t^-0.30671 t+3.36 \\ p(4) &=-0.0080556(4)^+0.11881(4)^-0.30671(4)+3.36 \end \nonumber \] Use the calculator to evaluate \(p(4)\) (see Figure \(\PageIndex\)). Rounding to the nearest fig 5.3.3.pngpenny, the price in February was \(\$3.52\) per gallon.

Example \(\PageIndex<2>\) If a projectile is fired into the air, its height above ground at any time is given by the formula \[y=y_+v_ t-\dfrac<2>g t^ <2>\label \] where \(y\) = height above ground at time \(t\) \(y_0\) = initial height above ground at time \(t = 0\) \(v_0\) = initial velocity at time \(t = 0\) \(g\) = acceleration due to gravity \(t\) = time passed since projectile’s firing If a projectile is launched with an initial velocity of \(100\) meters per second (\(100\)m/s) from a rooftop \(8\) meters (\(8\)m) above ground level, at what time will the projectile first reach a height of \(400\) meters (\(400\)m)? Note: Near the earth’s surface, the acceleration due to gravity is approximately \(9.8\) meters per second per second (\(9.8\)(m/s)/s or \(9.8\)m/s 2 ). Solution We’re given the initial height is \(y_0 = 8\)m, the initial velocity is \(v_0 = 100\)m/s, and the acceleration due to gravity is \(g =9.8\)m/s 2 . Substitute these values in Equation \ref, then simplify to produce the following result: \[\beging t^<2>> \\ (9.8) t^<2>> \\ >\end \nonumber \] Enter \(y=8+100 t-4.9 t^<2>\) as \(\mathbf \mathbf=\mathbf+100^ \mathbf-4.9^ \mathbf \wedge \mathbf<2>\) in the Y= menu (see the first image in Figure \(\PageIndex\)). After some experimentation, we settled on the WINDOW parameters shown in the second image in Figure \(\PageIndex\). Push the GRAPH button to produce the graph of \(y=8+100 t-4.9 t^<2>\) shown in the third image Figure \(\PageIndex\). In this example, the horizontal axis is actually the \(t\)-axis. So when we set \(\mathrm\) and \(\mathrm\), we’re actually setting bounds on the \(t\)-axis. fig 5.3.4.pngTo find when the projectile reaches a height of \(400\) meters (\(400\)m), substitute \(400\) for \(y\) to obtain: \[400=8+100 t-4.9 t^ <2>\label \] Enter the left-hand side of Equation \ref into \(\mathbf \boldsymbol<2>\) in the Y= menu, as shown in the first image in Figure \(\PageIndex\). Push the GRAPH button to produce the result shown in the second image in Figure \(\PageIndex\). Note that there are two points of intersection, which makes sense as the projectile hits \(400\) meters on the way up and \(400\) meters on the way down. fig 5.3.5.pngTo find the first point of intersection, select 5:intersect from the CALC menu. Press ENTER in response to “First curve,” then press ENTER again in response to “Second curve.” For your guess, use the arrow keys to move the cursor closer to the first point of intersection than the second. At this point, press ENTER in response to “Guess.” The result is shown in the third image in Figure \(\PageIndex\). The projectile first reaches a height of \(400\) meters at approximately \(5.2925359\) seconds after launch. fig 5.3.6.pngThe parabola shown in Figure \(\PageIndex\) is not the actual flight path of the projectile. The graph only predicts the height of the projectile as a function of time. Reporting the solution on your homework: Duplicate the image in your calculator’s viewing window on your homework page. Use a ruler to draw all lines, but freehand any curves.

Rounding to the nearest tenth of a second, it takes the projectile approximately \(t ≈ 5.3\) seconds to first reach a height of \(400\) meters.

The phrase “shade and label the point” means fill in the point on the \(t\)-axis, then write the \(t\)-value of the point just below the shaded point.

If a projectile is launched with an initial velocity of \(60\) meters per second from a rooftop \(12\) meters above ground level, at what time will the projectile first reach a height of \(150\) meters?

Answer

\(\approx 3.0693987\) seconds

Zeros and \(x\)-intercepts of a Function

Recall that \(f(x)\) and \(y\) are interchangeable. Therefore, if we are asked to find where a function is equal to zero, then we need to find the points on the graph of the function that have a \(y\)-value equal to zero (see Figure \(\PageIndex\)).

fig 5.3.7.png

Zeros and \(x\)-intercepts

The points where the graph off crosses the \(x\)-axis are called the \(x\)-intercepts of the graph of \(f\). The \(x\)-value of each \(x\)-intercept is called a zero of the function \(f\).

The graph of \(f\) crosses the \(x\)-axis in Figure \(\PageIndex\) at \((−3,0)\), \((−1,0)\), and \((3 ,0)\). Therefore:

A function is zero where its graph crosses the \(x\)-axis.

Find the zero(s) of the function \(f(x)=1 .5x +5 .25\).

Solution

Remember, \(f(x)=1 .5x +5 .25\) and \(y =1 .5x +5 .25\) are equivalent. We’re looking for the value of \(x\) that makes \(y = 0\) or \(f(x) = 0\). So, we’ll start with \(f(x) = 0\), then replace \(f(x)\) with \(1 .5x +5 .25\).

Now we solve for \(x\).

Check: Substitute \(−3.5\) for \(x\) in the function \(f(x)=1 .5x +5 .25\).

\[\begin f(x) &=1.5 x+5.25 \quad \color \text < The original function. >\\ f(-3.5) &=1.5(-3.5)+5.25 \quad \color \text < Substitute >-3.5 \text < for >x \\ f(-3.5) &=-5.25+5.25 \quad \color \text < Multiply: >1.5(-3.5)=-5.25 \\ f(-3.5) &=0 \quad \color \text < Add. >\end \nonumber \]

Note that \(−3.5\), when substituted for \(x\), makes the function \(f(x)=1 .5x+5 .25\) equal to zero. This is why \(−3.5\) is called a zero of the function.

Graphing calculator solution: We should be able to find the zero by sketching the graph of \(f\) and noting where it crosses the \(x\)-axis. Start by loading the function \(f(x)=1 .5x +5 .25\) into \(\mathbf \) in the Y= menu (see the first image in Figure \(\PageIndex\)).

Select 6:ZStandard from the ZOOM menu to produce the graph of \(f\) (see the second image in Figure \(\PageIndex\)). Press 2ND CALC to open the the CALCULATE menu (see the third image in Figure \(\PageIndex\)). To find the zero of the function \(f\):

fig 5.3.8.png

  1. Select 2:zero from the CALCULATE menu. The calculator responds by asking for a “Left Bound?” (see the first image in Figure \(\PageIndex\)). Use the left arrow button to move the cursor so that it lies to the left of the \(x\)-intercept of \(f\) and press ENTER.
  2. The calculator responds by asking for a “Right Bound?” (see the second image in Figure \(\PageIndex\)). Use the right arrow button to move the cursor so that it lies to the right of the \(x\)-intercept of \(f\) and press ENTER.
  3. The calculator responds by asking for a “Guess?” (see the third image in Figure \(\PageIndex\)). As long as your cursor lies between the left- and right-bound marks at the top of the screen (see the third image in Figure \(\PageIndex\)), you have a valid guess. Since the cursor already lies between the left- and right-bounds, simply press ENTER to use the current position of the cursor as your guess.
fig 5.3.9.png

The calculator responds by approximating the zero of the function as shown in Figure \(\PageIndex\).

fig 5.3.10.png

Note that the approximation found using the calculator agrees nicely with the zero found using the algebraic technique.

Find the zero(s) of the function \(f(x)=2 .6x−9.62\).

Answer

How long will it take the projectile in Example \(\PageIndex\) to return to ground level?

Solution

In Example \(\PageIndex\), the height of the projectile above the ground as a function of time is given by the equation \[y = 8 + 100t−4.9t^2 \nonumber \]When the projectile returns to the ground, its height above ground will be zero meters. To find the time that this happens, substitute \(y = 0\) in the last equation and solve for \(t\). \[0 = 8 + 100t−4.9t^2 \nonumber \]Enter the equation \(y = 8 + 100t − 4.9t^2\) into \(\mathbf \) in the Y= menu of your calculator (see the first image in Figure \(\PageIndex\)), then set the WINDOW parameters shown in the second image in Figure \(\PageIndex\). Push the GRAPH button to produce the graph of the function shown in the third image in Figure \(\PageIndex\).

fig 5.3.11.png

In this example, the horizontal axis is actually the \(t\)-axis. So when we set \(\mathrm\) and \(\mathrm\) , we’re actually setting bounds on the \(t\)-axis.

To find the time when the projectile returns to ground level, we need to find where the graph of \(y = 8+100t−4.9t^2\) crosses the horizontal axis (in this case the t-axis) . Select 2:zero from the CALC menu. Use the arrow keys to move the cursor slightly to the left of the \(t\)-intercept, then press ENTER in response to “Left bound.” Move your cursor slightly to the right of the t-intercept, then press ENTER in response to “Right bound.” Leave your cursor where it is and press ENTER in response to “Guess.” The result is shown in Figure \(\PageIndex\).

fig 5.3.12.png

Rounding to the nearest tenth of a second, it takes the projectile approximately \(t ≈ 20.5\) seconds to hit the ground.

If a projectile is launched with an initial velocity of \(60\) meters per second from a rooftop \(12\) meters above ground level, at what time will the projectile return to ground level?

Answer

\(\approx 12.441734\) seconds

This page titled 5.3: Applications of Polynomials is shared under a CC BY-NC-ND 3.0 license and was authored, remixed, and/or curated by David Arnold via source content that was edited to the style and standards of the LibreTexts platform.

  1. Back to top